Tuesday, April 20, 2010

Spider!

Tatted spider - mine was tatted with Turkish Simli thread (black with silver metallic). You will need a 4-hole button.


Wind one shuttle and ball using CTM.

Head:
R 9 ds
Body:
//ch2 then make a really, really long picot - about two feet or so (probably don't need quite that long, but better safe than sorry!). Repeat 3 more times (4 really long picots), ch2.//
Shuttle join to any hole on button.

Chain enough ds to fit around 1/4 of button loosely (mine took 12). Shuttle join to next button hole. Repeat all the way around button, shuttle join last chain to first join.
Repeat section between //
Join to base of 1st ring.

Now cut each of the long picots about 1/2 up the right side of the picot, so you have a shorter end on the right and a longer end on the left. These will become your new 'shuttle and ball threads' (the shorter end is the "shuttle"). Fingertat a chain of 20 ds. Knot the ends and cut off, leaving a bit of thread for "claws". Repeat with each picot to make the 8 legs.

Stiffen and arrange the legs to look "spidery".

6 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete
  2. This comment has been removed by a blog administrator.

    ReplyDelete
  3. This comment has been removed by a blog administrator.

    ReplyDelete
  4. Very great post. I simply stumbled upon your blog and wanted to say that I have really enjoyed browsing your weblog posts. After all I’ll be subscribing on your feed and I am hoping you write again very soon!

    ReplyDelete
  5. This comment has been removed by a blog administrator.

    ReplyDelete
  6. Hi there! I just want to give a huge thumbs up for the good info you've right here on this post. I shall be coming back to your weblog for extra soon. gsn casino games

    ReplyDelete